Showing 1–16 of 71 results

  • Refirm® 1.25 Hex Driver with SQ-Head (4×4)

    Refirm® 1.25 Hex Driver with SQ-Head (4×4)

    Refirm® 1.25 Hex Driver with SQ-Head (4×4) is available in Short and Long configurations with three specified lengths: 17 mm, 23 mm and 27 mm.

    Select options
    This product has multiple variants. The options may be chosen on the product page
  • Refirm® 17° Angular Multi-Unit

    Refirm® 17° Angular Multi-Unit

    Refirm® 17° Angular Multi-Unit is available in four gingival height configurations, with a Ø5.2 mm diameter and gingival heights ranging from 2.5 mm to 5.5 mm.

    Select options
    This product has multiple variants. The options may be chosen on the product page
  • Refirm® 30° Angular Multi-Unit

    Refirm® 30° Angular Multi-Unit

    Refirm® 30° Angular Multi-Unit is available in three gingival height configurations, with a Ø5.2 mm diameter and 3.5 mm, 4.5 mm and 5.5 mm gingival heights.

    Select options
    This product has multiple variants. The options may be chosen on the product page
  • Refirm® 45° Angular Multi-Unit

    Refirm® 45° Angular Multi-Unit

    Refirm® 45° Angular Multi-Unit is available in two gingival height configurations, with a Ø5.2 mm diameter and 5.5 mm and 6.5 mm gingival heights.

    Select options
    This product has multiple variants. The options may be chosen on the product page
  • Refirm® 52° Angular Multi-Unit

    Refirm® 52° Angular Multi-Unit

    Refirm® 52° Angular Multi-Unit is available in three gingival height configurations, with a Ø5.2 mm diameter and 4.5 mm, 5.5 mm and 6.5 mm gingival heights.

    Select options
    This product has multiple variants. The options may be chosen on the product page
  • Refirm® 60° Angular Multi-Unit

    Refirm® 60° Angular Multi-Unit

    Refirm® 60° Angular Multi-Unit is a single configuration featuring a 60° angle, Ø5.5 mm diameter, and 6.5 mm gingival height.

    Select options
    This product has multiple variants. The options may be chosen on the product page
  • Refirm® Abutment Locking Screw

    Refirm® Abutment Locking Screw

    Refirm® Abutment Locking Screw is a prosthetic component used for securing compatible abutment components within the Refirm® implant system.

    Add To Enquiry
  • Refirm® Angular Abutment

    Refirm® Angular Abutment

    Refirm® Angular Abutment is an angled restorative component available in 15° and 25° configurations, with a 3.0 mm gingival height and Ø4.5 mm diameter.

    Select options
    This product has multiple variants. The options may be chosen on the product page
  • Refirm® Ball Abutment

    Refirm® Ball Abutment

    Refirm® Ball Abutment is a prosthetic component with a 2.2 mm gingival height and Ø4.5 mm diameter, supplied in a Ti base without Hex configuration.

    Select options
    This product has multiple variants. The options may be chosen on the product page
  • Refirm® Castable Abutment

    Refirm® Castable Abutment

    Refirm® Castable Abutment is a Ti Base with Hex with Sleeve, featuring an 8.5 mm length, Ø4.5 mm diameter, and 2.2 mm gingival height.

    Select options
    This product has multiple variants. The options may be chosen on the product page
  • Refirm® Castable Abutment with Hex

    Refirm® Castable Abutment with Hex

    Refirm® Castable Abutment with Hex is a fully castable restorative component available in three gingival height configurations, with an 11.5 mm length and Ø4.5 mm diameter.

    Select options
    This product has multiple variants. The options may be chosen on the product page
  • Refirm® Castable Abutment without Hex

    Refirm® Castable Abutment without Hex

    Refirm® Castable Abutment without Hex is a fully castable restorative component available in three gingival height configurations, with an 11.5 mm length and Ø4.5 mm diameter.

    Select options
    This product has multiple variants. The options may be chosen on the product page
  • Refirm® Compact Surgical Kit

    Refirm® Compact Surgical Kit

    Refirm® Compact Surgical Kit is an organised surgical instrument set designed to support Refirm® implant placement procedures, with multiple drills and drivers arranged in a compact, dedicated tray.

    Kit Dimension:
    154 × 82 × 65 mm

    Add To Enquiry
  • Refirm® Contra-Angle Connector – SQ Head for Ratchet

    Refirm® Contra-Angle Connector – SQ Head for Ratchet

    Refirm® Contra-Angle Connector with SQ Head is a connector component for ratchet-assisted tightening and can be used for straight multi-unit tightening.

    Add To Enquiry
  • Refirm® Coping Screws

    Refirm® Coping Screws

    Refirm® Coping Screws are available in Closed Tray Screw – Long and Closed Tray Screw – Short configurations for impression coping applications.

    Select options
    This product has multiple variants. The options may be chosen on the product page
  • Refirm® Depth Marker

    Refirm® Depth Marker

    Refirm® Depth Marker is available in Ø2.0 mm and Ø2.5 mm configurations for depth assessment during the implant surgical workflow.

    Select options
    This product has multiple variants. The options may be chosen on the product page